Sun Visor - Shark SPARTAN GT PRO Owner's Manual

INSTALLATION OF THE SCREEN
1 - Introduce the visor into its slot
in a slightly inclined position. Fully
insert the visor into its slot and keep
pushing until it «clicks».
2 - Realign the circle on the visor
with that on the shell, just like during
removal. Now press and pivot the
locking pin backward in order to lock
the visor. Repeat this step on the
other side. Close the visor.
To adjust visor hardness and friction,
use an Allen wrench. Screw tighter to
harden, unscrew to relax.
16
WARNING! If you are not sure
that
the visor, do not use the helmet. The
visor could suddenly and without war-
ning become detached from the helmet
while riding, causing you to lose control
of your motorcycle, resulting in an acci-
dent, personal injury, or death.Contact
your retailer for any assistance or advice.
Do not ride with an open visor and
do not try to open or adjust the visor
while riding. The visor could suddenly
and without warning become detached
from the helmet, leaving your eyes and
face unprotected. In addition, your head
could be pulled to the side, causing you
to lose control of your motorcycle. These
events could cause you to lose control of
1 1
your motorcycle, resulting in an accident,
personal injury or death.

SUN VISOR

1 - Your helmet has been equipped
with an internal sun visor. To use this
accessory, redirect the arrow toward
the front. To cover the sun visor, repo-
sition the arrow toward the back.
WARNING! NEVER ride with the sun
shield as eye protection. You must
always ride with the visor in the lowe-
red position, as described in the previous
section.
2 2
2 2
2 2
you properly replaced
1 1
1 1