Visor - Shark NANO Owner's Manual

10

VISOR

A
HANDLING
To open the visor, pull it out on the left side,in order
to make it come out the locking pin.
Then raise the visor (fig. A).
To close, simply pull the visor down. It will lock
automatically (fig. B).
MAINTENANCE
For protection and improve its life, the outer sur-
face of your visor is anti-scratch treated.
C
Raise the visor in open position and remove by
taking it out of its holders by gently pulling forward
(fig. C).
Put back on by aligning the screen with holders
and pushing backward (fig. D).
WARNING! If your visor and/or sun shield no
longer provides you with clear visibility after
a period of service, you must immediately replace
it. Never ride if your sun shield is scratched, dirty,
B
When cleaning the screen, use lukewarm
water (below 40 degrees)
cloth (100% cotton
the screen. Neutral soap as "savon de
Marseille" can help you clean up.
WARNING!
Never
washing windows
other solvent type),
damage the screen treatment.
D
foggy or with your vision obscured in any way,
always ride with perfect visibility.
WARNING!
If you are not sure that you properly
replaced the visor, do not use the helmet. The visor
could suddenly and without warning become detached
from the helmet while riding, causing you to lose control of
your motorcycle, resulting in an accident, personal injury, or
death. Contact your retailer for any assistance or advice.
and a soft
and lint) to wipe
use any kind
(with alcohol or
these products can
vis
an
the
un
be
co
co
mo
na
Th
wit
Th
To
To
life
Na
an
To
sam
of
an