Advertisement
(i) Connect the DIN Jack to the Battery Back-up
receptacle on the main unit.
(2) Check the Voltage Selector if it is set to your
household AC voltage.
(3) Plug the power cord into a power outlet.
(4) furn on KX-A16B Power Switch.
®During the KX-A16B is recharging,
the
Charge Indicator light will remain on.
DIN Jack
mY
[) To main unit
— |O power
=
Outlet
soz
200/220/
| "
AC Power
240 V,
Cord
\50/60 H2/
Battery Low
| Power Switch
Indicator
Charge Indicator
Fig. 1
¥oiltage Selector
Check the Voltage Selector if it is set to your
nousehold AC voltage. If not, reset the Voltage
selector to the correct position with a screwdriver.
@ The KX-A16B requires to recharge for about 24
hours.
M@ The Battery Low Indicator will turn off when
Battery is fully recharged.
@ \f the Battery Low indicator light goes on, the
KX-A16B
will need to be recharged.
If you
leave it uncharged, the KX-A16B will be ex-
hausted and stop the power supply.
@ The Battery is good for 3 years.
PACKING MATERIALS
Ww
Fig. 3
Advertisement
