Kenwood DNX7120 Instruction Manual page 74

Setup Menu
mode.
"Full", "Just", "Zoom", "Normal"
121.Returns to the "SETUP Menu" screen.
Q
• When you select the Menu or Navigation, the display is
shown in the full size display mode automatically.The
screen mode of these displays cannot be changed.
• The picture quaility can be set for each source.
Full picture mode ("Full")
Justify picture mode ("Just")
Zoom picture mode ("Zoom")
Normal picture mode ("Normal")
You can set a security code to protect your
receiver system against theft.
Q
• When the Security Code function is activated, the code
cannot be changed and the function cannot be released.
Note the Security Code can be set as the 4 digit number
of your choice.
Display the Security Code Setup screen
Touch' - _ ° ...... in ttle "SETUP
Menu" screen (page 62).
[1 Displays the Security code input screen.
j2 Turns the SI function on or off.
If turned "On", the burglar alarm lamp
flashes when the vehicle ignition is off.
(J_ "On")
iS] Returns to the original screen.
Start Security Code setup
Q
• _ve already completed the code registration,
is displayed.
Enter a security Code
Input four-digit number.
74 @ DNX7120/DDX712/DDX7032