Toro Titan ZXM4875 Operator's Manual page 68

Hide thumbs Also See for Titan ZXM4875:

Available languages

Replacing the Mower Belt (continued)

7. Using a spring-removal too (Toro Part No. 92-5771), remove the idler spring from the

deck hook to remove tension on the idler pulley.

The spring is under tension when installed and can cause personal injury.

Be careful when removing the belt.

8. Roll the belt off the pulleys.

9. Route the new belt around the engine pulley and mower pulleys.

10. Use the spring-removal tool to install the idler spring over the deck hook and place

tension on the idler pulley and the mower belt.

Maintenance: Belt Maintenance

Engine pulley

Idler pulley

Spring-removal tool

Chapters