Scanning From Isis - Xerox DocuMate 742 User Manual

DocuMate 742

Scanning from ISIS

You can use the ISIS interface from QuickScan or any other application that will access the ISIS
driver. You received QuickScan with your scanner.
Note that the ISIS interface for each application varies depending on the application. Please
refer to that software application's User Guide for instructions on scanning the ISIS interface.
The QuickScan User's Guide is available on the installation disc that you received with the
scanner.
Accessing the ISIS Interface in QuickScan
Open the QuickScan software to access the ISIS driver scanning options. Please note that you
may see the following warning message:
1. Please disregard the message and click Continue.
The ISIS drivers were installed correctly during the installation of your scanner.
The Scanner Selection dialog box will then appear.
2. Select Xerox DocuMate 742 from the list of scanners and click OK.
Your scanner is then ready to work with the ISIS driver.
User's Guide
Scanning from ISIS
5
5-1