Xerox DocuMate 742 User Manual page 34

DocuMate 742
These icons next to each scan configuration indicate the scanning mode.
Color
See the sections "Creating a New Scan Configuration" on page 8 and "Editing or Deleting Scan
Configurations" on page 14.
NOTE: Use Configure Before Scan if you want to set the scanning mode manually before
scanning. See "Configure Before Scan" on page 14.
Select Format—A set of file formats for the scanned image for the selected button. The
formats are based on the type of Destination Application you select. This example shows the
formats that apply to Microsoft Outlook.
The icon names indicate their file types. See "Selecting Document and File Format Options" on
page 17 for more information about the available formats.
Options tab—Displays a window for selecting options related to the selected Destination
Application for the scanned image. See "Selecting Options for One Touch" on page 20 for
instructions on configuring the list of available destinations.
Properties button—Displays a window for selecting properties for each type of Destination
Application. See "Setting Destination Application Properties" on page 21.
Refresh button—Updates the links between all your computer's Destination Applications and
One Touch 4.0. If you install new software that can be used as a Destination Application, click
the Refresh button to link the new software to One Touch 4.0
New/Copy/Edit/Delete buttons—Click New or Copy to add new scan configurations to the list.
Click Edit or Delete to change or remove them.
OK/Cancel/Apply buttons—OK accepts any changes and closes the window. Apply accepts
any changes but leaves the window open so you can continue making additional changes.
Cancel closes the window without accepting any changes.
User's Guide
Black and White Grayscale
Scanning From One Touch
Configure
Before Scan
2-7