Table of Contents
Advertisement
Printing Hanging and Horizontal Banners (Large-Format
Printing)
A drapery or banner up to 18.0m can be made by enlarging or reducing original documents made on
application software.
The procedure for printing hanging and horizontal banners is as follows:
1.
1. Register custom paper size
From Paper Size, use Manage Custom Sizes... to
2.
2. Select the paper size
In the
Print
dialog, select a registered custom paper size from the Paper Size list.
3. Select Page Processing from Printer Options
3.
4. Select roll paper width
4.
Set Roll Paper Width to the width of the roll paper loaded in the printer.
5. Selecting On (Bordered) or On (Borderless) for Fit Roll Paper Width
5.
Important
• When using the customer paper size and printing the whole sheet without edges, create a paper
size with the Margins values all set to 0mm in Manage Custom Sizes... from Paper Size, and
select On (Borderless) from the Fit Roll Paper Width in Page Processing.
6. Complete the setup
6.
Click Print.
When you print, the hanging or horizontal banner is printed by using the custom paper size.
Note
• Maximum printable length is 18.0 m. In the event the enlarged length exceeds 18.0 m, the entire
document is shrunk so that it fits before being printed.
register the paper size
166
that you want to use.
Advertisement
Table of Contents
Troubleshooting
