End Of Media Roll; Out Of Media - Xerox Synergix 8825 Supplementary Manual

Digital solution folding supplement

Hide thumbs Also See for Synergix 8825:

Table of Contents

XES Synergix 8825/8830/8855 Digital Solution Folding Supplement

End of Media Roll

An out of media situation will affect the folding of a print. The resulting affect

is dependent on the type of printer being used. There could be a print that is

the wrong length, or there could be and extra copy of a print.

If an XES Synergix 8825/8830 Digital Solution is being used, look for an

extra page in the folded stack then run the print again.

If an XES Synergix 8855 Digital Solution is being used, look for a short sheet

in the folded stack then run the print again.

It is recommended that media rolls that are glued or taped to the core be

used to prevent this. Xerox Engineering Systems media meets these

requirements and is recommended for use in the XES Synergix 8825/8830

Digital Solution and Synergix 8855 Digital Solution.

Table of Contents