Husqvarna DXR 95 Operator's Manual page 25

• Use personal protective equipment. Refer to
Personal protective equipment on page 25 .
• Keep not approved persons at a safe distance from
the work area.
• Make sure that you are in a safe and stable position
during operation.
• Put on approval fall protection system when you
operate the product in locations where there is a fall
risk.
• Do not stay where the product can hit you. Do not
stay below the arm system if it is lifted.
• Do not stay below the work object.
• Do not stay where you can become hit by material
that becomes loose during operation.
• Operate the product safely. Do not put the product
into operation before all safety risks are removed.
• Do not use the product to lift persons.
• Stop the product before you go away from it.
• Keep the remote control from not approved persons.
• Always disconnect the power cord before you go
away from the product.
• Keep your feet away from the remote control cable
and the power cord to decrease the risk of fall injury.
• Do not use cable connection between the product
and the remote control if there is a risk that the
product can fall.
• If the product does not operate correctly, stop the
motor.
• Do not operate the product unless you can get aid if
an accident occurs.
• If vibrations occur in the product or the noise level
from the product is unusually high, stop the product
immediately. Examine the product for damages.
Repair damages or let an approved service agent
do the repair.
• This manual cannot include all situations that can
occur when you use the product. Be careful and
use common sense. Do not operate the product or
do maintenance on the product if you are not sure
about the situation. Speak to a product expert, your
dealer, service agent or approved service center for
information.
• Always use approved accessories. Speak to your
dealer for more information.
• Do not use the product if the hydraulic oil
temperature is higher than 90°C/194°F. The
hydraulic system and electronic components can be
damaged.
• Do not operate the product with tools and use lower
speed, if the hydraulic oil temperature is less than
10°C/50°F. Refer to
on page 39 .
• Use the product in altitudes lower than 1000 m. If
it is necessary to operate the product in altitudes
higher than 1000 m, speak to your Husqvarna
service agent.
• Do not operate the product without the covers
installed.
1401 - 005 - 11.01.2024
To let the product become warm
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
• Always use correct personal protective equipment
when you operate the product. The personal
protective equipment does not remove the risk of
injury. The personal protective equipment decreases
the grade of injury if an accident occurs. Let your
dealer help you select the right equipment.
• Use approved eye protection with side protection
while you operate the product.
• Use heavy duty clothing that is not loose but lets you
move freely.
• Use approved protective gloves that enables a solid
grip.
• Use an approved protective helmet.
• Always use approved hearing protection while you
operate the product. Noise for a long period can
cause noise-induced hearing loss.
• The product can cause dust and fumes that contain
dangerous chemicals. Use an approved respiratory
protection.
• Do not let chemicals such as cleaning agent, grease
and hydraulic oil touch the skin. Hydraulic oil and
grease can cause skin irritation. Clean the skin
immediately if it touches chemicals.
• Put on approval fall protection system when you
operate the product in locations where there is a fall
risk.
• Use boots with steel toe-caps and non-slip soles.
• Make sure that you have a first aid kit near.
• Sparks can occur when you operate the product.
Make sure that you have a fire extinguisher near.
Work area safety
WARNING:
no persons, children or animals in the work
area. If a person or animal enters the area,
immediately stop the product.
• Look out for bystanders, objects and situations that
can prevent safe operation of the product.
• During operation, no person is permitted in the work
area (X) and (Y) shown in the illustration. This
applies to bystanders and the operator. The area
(X) is the range of the product. Refer to
dimensions on page 155 .
Different work methods, work objects, tools and
surfaces can change the dimension of the work area
(Y). Look for possible risks before you operate the
Read the warning
Make sure that there are
Range
25