Setting Paper Types and Sizes
Setting Paper Trays
When loading paper in Tray 3 or the 550-Sheet Feeder (optional), it is necessary to set the
paper type on the control panel.
When loading paper in Tray 1 (MPT), set the paper size and type on the control panel when
printing. When MPT Mode has been set to Panel Specified (default) on the control panel,
you can set the paper size and type on the control panel.
This section describes how to set the paper size and type on the control panel.
Note:
When you set MPT Mode to Panel Specified , printing will be performed only when
the settings for the paper size and type configured on the print driver match the settings
on the control panel. When the settings on the print driver and control panel do not match,
follow the instructions displayed on the control panel.
You can also display the message to set the paper size and type on the control panel every
time you load paper into each tray.
See also:
Description of Menu Items
Setting Paper Types
Caution:
Paper type settings must match those of the actual paper loaded in the trays.
Otherwise, print-quality problems can occur.
1. Press the
button to display the Menu screen.
Menu
2. Select Tray Settings , and then press the
3. Select the tray, and then press the
4. Select Paper Type , and then press the
5. Select the correct paper type for the loaded paper, and then press the
6. Press the
button.
Menu
on page 93
button.
OK
button.
OK
button.
OK
Phaser® 6280 Printer
50
Setting Paper Types and Sizes
button.
OK