Table of Contents
Advertisement
Steam Cleaning & Sanitizing* (continued)
6. To sanitize* an area of your
floor after cleaning, ensure
your machine is in tile mode
for 3 minutes, then slowly and
evenly move machine back and
forth at least 5 times over the
continuous
area using
Caution: To prevent damage to machine, do not step on foot of machine during use.
*Kills 99.9% of Human Coronavirus (Strain 229E), Influenza A (H1N1) virus, Staphylococcus aureus, Klebsiella aerogenes, and Trichophyton interdigitale when
used as directed. Testing conducted in a third-party laboratory under controlled conditions. Results may vary.
After-Cleaning Care
1. Press power button to turn
OFF. Unplug the machine.
**Machine wash warm. Use only liquid detergents. Do not use bleach or fabric softener. Tumble dry on low. Do not iron or dry clean.
Note: Any other maintenance or servicing not included in this manual should be performed by an
authorized service representative.
Storing Your Machine
When finished using the product, wrap cord around cord wrap for storage. Store machine indoors in
a dry location in an area where the product is not likely to get damaged.
6 BISSELL.com
x5
x5
7. Press steam mode button
to stop pads and steam.
Note: Allow floor to dry for
5 minutes before returning
to use.
steam.
2. Carefully remove mop pads.
Note: Mop pad and foot may
be hot.
More Tips
Press the no steam
mode button to
scrub without
steam if desired.
When water is depleted
during use, (
) symbol will
appear to notify that water
tank needs to be filled.
When machine is standing
upright, it will stop spinning
and producing steam.
Display will blink (
3. Mop pads may be machine**
or hand washed. Let mop
pads
dry completely
reattaching.
).
before
Advertisement
Table of Contents
