Bissell SPINWAVE SMARTSTEAM 3712 Series Manual page 5

Scrubbing and sanitizing steam mop
Table of Contents

Advertisement

Steam Cleaning & Sanitizing*
Your steam cleaner was tested by third-party laboratories under controlled conditions
to ensure it sanitizes and kills 99.9% of germs, bacteria and viruses*, including
Coronavirus and Influenza viruses. Please use as directed; your results may vary.
Cleaning Tips
• Before using your steam mop to clean and sanitize*, thoroughly sweep or vacuum floor.
• Your steam mop is designed to clean hard flooring such as ceramic tile, laminate, marble, stone,
and sealed hardwood floors. Use of your steam mop on waxed or some unwaxed floors may result
in a diminished glossiness. The steam mop is not intended for use on vinyl, vinyl plank, linoleum,
or unsealed floors. For best results, test in an inconspicuous area and check the care instructions
from your flooring manufacturer.
Tough Messes
For difficult, stuck-on messes, aim center of mop pad on stain. Steam comes through center of
each mop pad.
Seeing a dry path on the floor where the pads touch?
Slow down for even cleaning. Aim for 8 inches per second. Your foot may be a helpful reference as
you move the machine along.
1. Plug machine into an outlet.
Press power button to turn
machine ON.
3. Press steam mode button
to heat. Mop pads will begin
to spin. Temperature will be
displayed and rise as machine
heats up.
After 15 seconds,
blinking amber light will turn
solid indicating that steam is
ready.
*Kills 99.9% of Human Coronavirus (Strain 229E), Influenza A (H1N1) virus, Staphylococcus aureus, Klebsiella aerogenes, and Trichophyton interdigitale when
used as directed. Testing conducted in a third-party laboratory under controlled conditions. Results may vary.
The display screen will light
and blink.
Note: When upright, mop
heads will not spin and (
will show on display screen.
4. Press the steam mode
button again to select your
desired floor type
setting.
Hard Floor
Tile
Standby
2. Recline machine. The display
screen will light in standby
mode.
)
5. To steam clean, move the
machine slowly and evenly,
back and forth over your floors
CONTINUED ON NEXT PAGE
BISSELL.com 5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spinwave smartsteam 3897 series

Table of Contents