Printer Operation Problems - Xerox DocuPrint C11 User Manual

Printer Problems
Printer Operation
Problems
Table 5.1

Printer operation problems

Problem
Black area is not solid
black.
Color Misregistration
Image Smear
Missing or light color
5-4 DocuPrint C11 Color Inkjet Printer User Guide
See Table 5.1 for corrective actions when the printer will
not print or when printed output is not what you expect.
Description/Corrective Action
A solid black area prints with part of the area white.
• Perform "Cleaning Print Cartridges" (page 4-7).
• Check if your print cartridge is out of ink. Print a Test Page and a Demo Page
to see if the black output is uniform. Refer to "Printing a Test Page" (page 3-9)
and "Printing a Demo Page" (page 3-9).
If this does not solve the problem, replace the print cartridge.
A color has shifted outside the designated area or has been superimposed over
another color area.
Perform "Print Cartridge Alignment" (page 5-8).
The ink is not sufficiently dry before the page is delivered to the output page.
• Use the printer setting Activate Dry Delay Time to allow more time between
prints to provide more time for drying. You can find this setting in the Printer
Monitor under the Printer Care tab.
When one or more colors are light or missing:
• Perform "Cleaning Print Cartridges" (page 4-7).
• Check if your print cartridge is out of ink. Print a Test Page and a Demo Page
to see if a color is missing. Refer to "Printing a Test Page" (page 3-9) and
"Printing a Demo Page" (page 3-9).
If this does not solve the problem, replace the print cartridge.
Table 5.1 Page 1 of 4