Advertisement
Quick Links
Advertisement
Related Manuals for NCR 7360-K064
Summary of Contents for NCR 7360-K064
- Page 1 Kit Instructions Cylindrical Tri-Light 7360-K064 Issue A...
- Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Software screen images are representative, and in some cases, may not match a customer’s installed software exactly.
- Page 3 Revision Record Issue Date Remarks Nov 2021 First issue.
-
Page 4: Kit Contents
Tri-Light/Lane Light device. Kit Contents Pat Number Description 497-0531022 7360-K064 Kit - Cylindrical Tri-Light 497-0527617 Cylindrical Tri-Light Assembly, White 497-0423108 Instructions-Kit (Reference Sheet) * Items marked with an asterisk are not called out on the image. -
Page 5: Installation Procedures
Cylindrical Tri-Light Installation Procedures To install the Cylindrical Tri-Light, follow these steps: Note: 7360-K067 Standard Tri-Light/Lane Light Pole with Cable Kit must be ordered with this kit when installing on units that are not configured with Tri-Light/Lane Light device. 1. If necessary, do any of the following: •... - Page 6 Removing the Cylindrical Tri-Light Assembly To remove the Cylindrical Tri-Light assembly, follow these steps: 1. Turn off the NCR SelfServ Checkout software and hardware systems. For more information, refer to "General Operational Procedures" section of NCR SelfServ™ Checkout (7360) Hardware Service Guide (B005–0000–2378).
- Page 7 Cylindrical Tri-Light 3. Lift the Cylindrical Tri-Light assembly and then disconnect the cables.
- Page 8 Removing the Tri-Light/Lane Light (R6) To remove the Tri-Light/Lane Light assembly, follow these steps: 1. Turn off the NCR SelfServ Checkout software and hardware systems. For more information, refer to "General Operational Procedures" section of NCR SelfServ™ Checkout (7360) Hardware Service Guide (B005–0000–2378).
- Page 9 Cylindrical Tri-Light 3. Lift the Tri-Light/Lane Light assembly and then disconnect the cables. Tip: Mark all cables as to where they are connected to quickly determine the corresponding port when reconnecting the cables.
- Page 10 Cylindrical Tri-Light Installing the Cylindrical Tri-Light Assembly To install the Cylindrical Tri-Light assembly, follow these steps: 1. Connect the Cylindrical Tri-Light assembly cable with the cable extender in the pole. Note: The Cylindrical Tri-Light assembly cable with either a white or black cable extender.
- Page 11 Cylindrical Tri-Light 2. Insert the Cylindrical Tri-Light assembly into the Tri-Light/Lane Light pole. Ensure that the pole holes are aligned.
- Page 12 Cylindrical Tri-Light 3. Secure the Cylindrical Tri-Light assembly to the pole with a screw. 4. Run the ADD utility to ensure device is updated with the latest firmware.