Advertisement
Quick Links
Advertisement
Related Manuals for NCR 1657-K001
Summary of Contents for NCR 1657-K001
- Page 1 Kit Instructions N3000 Rack Mount Bracket 1657-K001 Issue A...
- Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
- Page 3 Table of Contents N3000 Rack Mount Bracket Introduction Kit Components Required Tools Installation Procedures...
- Page 4 Revision Record Issue Date Remarks Jun 2018 First Issue...
-
Page 5: Kit Components
N3000 Rack Mount Bracket Introduction The Rack Mount Bracket kit provides a solution for mounting the NCR N3000 Site Controller on a rack. Kit Components Part Number Description 497-0478366 N3000 19-inch Rack Mount Bracket 497-0480060 (4) #6-32 x 0.23in Step Pan Head Flat Screw 497-0480061 (2) #6-32 x 0.3120in Machine Phillips Pan Head, SEMS, Black... -
Page 6: Installation Procedures
N3000 Rack Mount Bracket Installation Procedures 1. If applicable, rotate the antennas so that they are parallel to the N3000. 2. Lay the N3000 face down on a flat surface. 3. Insert the four Step Pan Head Flat Screws into the hole locations marked with a W. - Page 7 N3000 Rack Mount Bracket 4. Position the N3000 so that its ports are facing forward, mount the four Step Pan Head Flat Screws onto the Rack Mount Bracket, and slide the N3000 forward to lock it in place. Caution: Ensure that all four screws are fully inserted into the bracket. 5.