Random Light Stripes - Xerox Phaser 8560 User Manual

Random Light Stripes

Possible Cause
Light stripes appear
randomly on the test page
when one or more color bars
is missing.
See also:
Online Support Assistant at
Light Stripes Test
To prevent random light stripes from appearing on the page:
1. On the control panel, select
the OK button.
Print Quality Problems
2. Select
Eliminate Light Stripes
3. Select
OK button.
4. Perform the Basic, Advanced, and Jet Substitution procedures as
indicated in the steps below.
Basic
Basic
1. Select , and then press the OK button.
2. Once the Basic procedure is completed, repeat the procedure to
eliminate remaining light stripes.
If the problem continues, select the
Advanced
Advanced
1. Select , and then press the OK button.
2. Follow the instructions to select the missing jet's color and
number. See the Light Stripes Test page to determine the color
and jet number of the missing jet.
If the problem continues, select the
substitute a jet for the malfunctioning jet causing the light stripe.
Jet Substitution Mode
Jet Substitution Mode
1. Select
2. Follow the control panel prompts to select the color and
malfunctioning jet number indicated on the Light Stripes Test
page.
Note: When the Jet Substitution Mode is activated, a dot appears
next to the number of each substituted jet. Substituted jets may
continue to display missing colors since the Light Stripes Test page
ignores the Jet Substitution mode. Jet substitution only works during
regular printing.
www.xerox.com/office/8560Psupport
Phaser® 8560 Color Printer
4-8
Solving Print-Quality Problems
Solution
Troubleshooting
, and then press
, and then press the OK button.
, and then press the
Advanced
option.
Jet Substitution Mode
, and then press the OK button.
to