Error Messages; Registration Shift And Skew - Xerox 4890 Product Reference

Error messages

Registration shift and skew

XEROX 4890 HIGHLIGHT COLOR LPS PRODUCT REFERENCE
If any part of a print line originates off the system page, the
following message is displayed:
OS6905 DATA ORIGIN OFF PAGE -- CHECK OUTPUT
This message line appears only once during a print job. It
indicates that a print line origin problem exists within the form
description, or that an excessive SHIFT value has been specified.
Refer to the Xerox 4850/4890 HighLight Color LPS Forms
Creation Guide for more information.
The registration of a printed image can appear shifted or skewed
on a page if the sheet of paper is misaligned as it enters the
printer. Because of the design of the LPS feeder, the image
registration on each page can vary slightly both horizontally and
vertically by up to .05 inch. (1.0 mm). The image can also be
slanted or skewed slightly by up to .05 inch. (1.0 mm) in
opposite directions, for a maximum skew of 0.1 inch. (2.0 mm).
(Refer to figures 5-3 and 5-4.)
Note that the following figures are the same specifications
merely rotated to show portrait and landscape orientations. The
shift and skew variances described here are within allowable
specifications, but as this can affect the registration of variable
data in preprinted forms and the placement of images close to
the edge of the page, it is important to make allowance for this
condition.
USER CONSIDERATIONS
5-5