Canceling A Copy Or Scan Job - Xerox 4595 Getting Started

2 . B a s i c O p e r a t i o n

Canceling a copy or scan job

2 - 1 0
12. Press the Start button to copy or scan the job.
NOTE 1: If a problem occurs, an error message appears in the
display of the Touch Screen. Follow the instructions on the
screen to correct the problem.
NOTE 2: At this time, you can program your next copy or scan
job. For more information, refer to your User Guide.
To cancel a copy or scan job, follow the procedure below.
1. Press Stop either on the touch screen or the Stop button on
the Control Panel.
2. As the copy or scan job stops, the screen displays a Clear
button.
X e r o x 4 5 9 5 C o p i e r / P r i n t e r G e t t i n g Sta r t e d
Start
Stop