<
E.
Specifying PCL 5 Mode for the Serial Interface
This example shows you how to designate the PCL
5 mode for the serial interface.
To specify the PCL 5 mode for serial interface:
1. Press the Menu key to take the printer
2. Press the Down arrow key until the display
3. Press the Enter key.
4. Press the Down arrow key until the display
5. Press the Enter key.
6. Press the Down arrow key to display:
7. Press the Enter key.
8. Press the Down arrow key to display _PCL 5.
cut top 2"
offline and display the Control Panel Main
Menu.
The display reads:
LANGUAGE
= English
reads SET INTERFACE.
PRINTOUT MENU.
reads SERIAL.
Enable I/F
= On
Printer Type
=PS/PCL Sensing
*PS/PCL Sensing.
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Operator Guide
The display reads
The display reads:
The display reads
cut 1">
2-49