<
J-4
Glossary
embedded commands
emulation
error messages
escape character
escape
sequence
F
Face-up Output Tray
factory default
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
cut top 2"
Control codes within the text of a
file.
Emulation is when one device is set up
to perform like a different device.
These are control panel display
messages that are shown when the
printer has encountered some
difficulty.
A control code, or control character,
represented by ASCII 1B, decimal 27,
which must be placed in front of a
printer command.
A sequence of characters beginning
with an escape code and comprising a
printer command.
This is a special printer feature that
allows the paper to exit the printer,
printed side facing up.
Output Tray is installed directly
above the upper paper tray.
useful feature when using the manual
feed tray for printing on heavy stock
or envelopes, since it is a straight
paper path from manual feed tray to
the Face-up Output Tray.
Factory defaults refer to the settings
cut 1">
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
The Face-up
This is a