Xerox 4215 User Manual page 263

<
Paper
Basis Weight
Grain
Moisture
Furnish
(Composition)
Acid Content
Ash Content
Opacity
Brightness
Caliper
Curl
Cut Edge
Conditions
Finishing
Fusing
Compatibility
Packaging
Smoothness
Stiffness
Surface
Electrical
Properties
cut top 2"
Table G-1
Paper Specifications
Specification
16 to 28 pound (60 to 135 gsm)
Long grain
4% to 6% by weight
100% chemical wood pulp and/or
5.5 pH minimum
Not to exceed 10%
85% minimum
83% minimum
3.0 to 7.0 mils
In ream: flat within 0.3 inch
(8mm)
Cut with sharp blades with no
Cut sheet to +/- 0.031 inch of
nominal, +/- 0.2° square
Must not scorch, melt, offset or
release hazardous emissions when
heated to 200° C (392° F) for 0.1
Moisture-proof ream wrap
60 to 250 Sheffield (rougher
surfaces tend to reduce image
1.6 to 7.5 machine direction/0.6
to 3.5 cross direction (Taber)
12 minimum wax pick (Dennison)
Surface Resistivity:
10 10 ohms/sq.
(conditioned at 23°
C and 50% relative humidity)
Volume Resistivity:
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
cut 1">
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Operator Guide
2.0 to 15 x
1.2 to 15 x
G-5