Xerox WorkCentre XD100 User Manual page 61

Problem
Printing is too
slow
Irregular faded
patches of
print
Black staining
Probable Cause
The computer CPU
specification may be
incorrect.
The computer parallel port
may not be set for high
speed communications.
If using Windows 3.1x, the
background printing item
in the options menu of
print manager may be set
incorrectly.
If using Windows 95, the
spool setting may be set
incorrectly.
Computer may not have
enough memory (RAM).
Print Job to large
There is a paper quality
problem.
Toner may be unevenly
distributed.
There is a paper quality
problem.
Remedy
Check that the computer
meets the minimum
specification.
If your computer is equipped
with an ECP parallel port,
enable this mode of
operation. Refer to the
Enabling High Speed
Printer Communications
section and your computers
user guide.
Select Background Printing
from the options menu of
print manger.
Point to the Start Task bar
and then click Settings then
Printers. Click the Xerox
Document WorkCentre XD
with the right mouse button.
Click Properties and then
spool settings on the details
tab. Select the desired
setting from the available
choices.
Install more RAM in your
computer.
Reduce resolution from 600
dpi to 300 dpi.
Use only paper that meets
the specifications required by
the printer.
Remove the toner cartridge
and shake it gently to evenly
distribute the toner. Then
reinstall the toner cartridge.
Use only paper that meets
the specifications required by
the WorkCentre.
53