Xerox WorkCentre XD100 User Manual page 51

Printer Driver Software Installation
4. Ensure that the power cord is plugged into the WorkCentre and then
into a grounded outlet.
Do not attach your WorkCentre to a pass-through port of another
device (scanner, CD-ROM drive, tape drive, Zip
disk).
5. Turn on the PC.
Note: Close all applications before installing the printer driver.
6. Start Windows on your computer.
7. Insert the WorkCentre XD CD-ROM into the CD-ROM Drive.
Go to step 8 of the Installation procedure for the software version
Installation for Windows 3.1x
8. Choose File from the menu bar in Program Manager, and then choose
the Run... command.
9. Type D:\SETUP (or the appropriate drive letter depending on your CD-
ROM Drive) in the command line box. Click on the OK button to
proceed.
10. Follow the on-screen instructions.
11. When the install is complete, restart Windows and turn on the
WorkCentre.
Installation for Windows NT 4.0 or 95/98
7)
8. Click on the Start button and then choose the Run menu option.
9. Type D:\SETUP (or the appropriate drive letter depending on your CD-
ROM Drive) in the command line box. Click on the OK button to
proceed.
10. Turn on the WorkCentre.
11. Follow the on-screen instructions.
If you wish to print a test page, ensure paper is loaded and then click
the Yes button.
1. Ensure that the computer and the
WorkCentre are turned off.
2. Plug the IEEE-1284 cable into the
parallel port on the WorkCentre.
3. Plug the other end of the IEEE-1284
cable into the computer.
that you are running.
(continued from step 7)
™
drive or external
(continued from step
43