Xerox WorkCentre XD100 User Manual page 15

Installation
Follow the steps below to properly set up your Xerox WorkCentre.
(continued)
1. Remove the bag from the WorkCentre.
2. Remove the pieces of tape A, B, C, D,
Remove the tape and the packing material
supporting the clear plastic 2-sided tray.
To ensure the 2-sided tray is in the correct
position, gently push it in the direction
shown by the arrow.
3. Open the document cover and remove
4. Unscrew and remove the shipping
CAUTION: The WorkCentre will
malfunction if the shipping screw is not
removed.
5. Lift and pull open the paper tray. Turn
CAUTION: Paper will misfeed if the paper
tray button is not removed.
Note: Be sure to remove the pressure
plate lock from both paper trays.
and the packing material E.
XD130df/155df copier only
XD130df/155df copier only
the packing materials shown.
screw from the left side of the
WorkCentre.
and remove the paper tray button.
For the XD 120f/
130df/
155df copier
only
7