Rear Cross-Traffic Collision-Avoidance Assist Operation - Hyundai SX2 Owner's Manual

Information
• If you change the Warning methods,
the Warning methods of other Driver
Assistance systems may change.
• If you turn off the haptic warning when
the warning volume is '0', the warning
volume turns on and sets to '2'.
• If you set the warning volume to '0'
when the haptic warning is off, the
haptic warning turns on.
• If the engine is restarted, Warning
methods maintain the last setting.
• The setting menu may not exist based
on vehicle specification.
Rear Cross-Traffic
Collision-Avoidance Assist
operation
Rear Cross-Traffic Collision-Avoidance
Assist warns and helps control the vehicle
depending on collision risk level:
'Collision Warning', 'Emergency Braking'
and 'Stopping vehicle and ending brake
control'.
Collision Warning
2C_RCCACollisionWarningInfo
2C_RCCACollisionWarningInfo_2
• Rear Cross-Traffic Collision-Avoidance
Assist operates when all the following
conditions are satisfied:
• The gear is shifted to R (Reverse)
• Vehicle speed is below 5 mph (8 km/h)
• The approaching vehicle is within about
25 m (82 ft.) from the left and right side
of your vehicle
• The speed of the vehicle approaching
from the left and right is above 3 mph (5
km/h)
7
7-137