Hyundai SX2 Owner's Manual page 404

Driver Assistance System
• Emergency braking will be assisted to
help prevent collision with the vehicle
in the blind spot area.
• Blind-Spot Collision-Avoidance Assist
will operate when your vehicle speed is
below 2 mph (3 km/h) and the speed of
the vehicle in the blind spot area is
above 3 mph (5 km/h).
2C_DriveCarefullyInfo
• When the vehicle is stopped due to
emergency braking, the 'Drive
carefully' warning message will appear
on the cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
• Brake control will end after the vehicle
is stopped by emergency braking for
about 2 seconds.
7-50
WARNING
Take the following precautions when
using Blind-Spot Collision-Avoidance
Assist:
• For your safety, only change the
Settings after parking the vehicle at a
safe location.
• If any other system's warning message
appears or audible warning is
generated, Blind-Spot
Collision-Avoidance Assist's warning
message may not be displayed and
audible warning may not be generated.
• You may not hear the warning sound of
Blind-Spot Collision-Avoidance Assist if
the surrounding is noisy.
• Blind-Spot Collision-Avoidance Assist
may not operate if the driver applies the
brake pedal to avoid a collision.
• When Blind-Spot Collision-Avoidance
Assist is operating, braking control by
the function will automatically cancel
when the driver excessively depresses
the accelerator pedal or sharply steers
the vehicle.
• During Blind-Spot Collision-Avoidance
Assist operation, the vehicle may stop
suddenly injuring passengers and
shifting loose objects. Always have the
seat belt on and keep loose objects
secured.