Hyundai SX2 Owner's Manual page 81

WARNING
Take the following precautions when
using the ISOFIX system:
• Read and follow all installation
instructions provided with your Child
Restraint System.
• To prevent the child from reaching and
taking hold of unretracted seat belts,
buckle all unused rear seat belts and
retract the seat belt webbing behind
the child. The child can be strangled if a
shoulder belt becomes wrapped
around their neck and the seat belt
tightens.
• Never attach more than one Child
Restraint System to a single anchorage.
This may cause the anchorage or
attachment to come loose or break.
• Always have the ISOFIX system
inspected by your dealer after a
collision. A collision can damage the
ISOFIX system and may not properly
secure the Child Restraint System.
Securing a Child Restraint System
seat with Top Tether Anchorage
system
2C_ALRSeatBeltTetherAnchor
First secure the child restraint with the
ISOFIX anchorages or the seat belt. If the
child restraint manufacturer
recommends that the top tether strap be
attached, attach and tighten the top
tether strap to the top tether strap
anchorage.
Top tether anchorages are located on the
rear of the seatbacks.
2C_ALRSeatBeltInstall
To install the top tether anchor:
1. Route the Child Restraint System top
tether strap over the seatback. Route
the tether strap under the head
restraint and between the head
restraint posts, or route the top tether
strap over the top of the vehicle
seatback. Make sure the strap is not
twisted.
3
3-41