Xerox WorkCentre M940 User Manual page 10

C O N T R O L P A N E L
8. Reduce/Enlarge: Adjust the size copy desired
9. Scan Mode: Enter Scan Mode
10. Navigator Control: Move between selections
11. Error light: Lights when error occurs
12. Select button: Select options
13. Copy Quantity: Select copy quantity
14. Start: Starts scanning or copying
15. Power: Turns WorkCentre on and off, however, a residual amount of power is always on, as the
WorkCentre requires a small amount of power to prevent the ink in the nozzles from drying.
1.4
U s e r G u i d e