Further Accessories - Viessmann VITODENS 050-W Technical Manual

Installation accessories
Wall clearance 90 mm
Connections (male thread)
Gas shut-off valve
Heating flow/heating return
Cold water/DHW
Wall spacer frame
For gas combi and system boilers

Further accessories

Hydraulic adaptor
Part no. ZK02587
For connection to on-site pipework with surface mounting
For replacing the older appliances below with the Vitodens 100-W:
■ Pendola
■ Vitopend (from 2004 onwards)
■ Thermoblock-VC and VC 110 E/112 E
■ Thermoblock-VCW
■ Cerastar-ZR or Ceramini
■ Cerastar-ZWR
Connection to on-site heating flow/heating return:
Connection pipes with union nuts and connection pieces Rp ¾
(female thread)
The pre-plumbing jig for surface mounting must be ordered sepa-
rately.
Hydraulic adaptor
Part no. ZK02588
For connection to on-site pipework with flush mounting
VITODENS
(cont.)
R ¾
R ¾
R ½
Part no. ZK06124
Comprising:
■ Fixings
Wall clearance: 90 mm
For replacing the older appliances below with the Vitodens 100-W:
■ Pendola
■ Vitopend (from 2004 onwards)
■ Thermoblock-VC and VC 110 E/112 E
■ Thermoblock-VCW
■ Cerastar-ZR or Ceramini
■ Cerastar-ZWR
Connection to on-site heating flow/heating return
Connection pipes with union nuts and connection elbows G ¾ (male
thread)
The pre-plumbing jig for surface mounting must be ordered sepa-
rately.
Heat meter
For installation in the connection line
Part no. Suitable for DHW cylinders:
7172847 – Vitocell 100: Up to 500 l capacity
– Vitocell 300: Up to 200 l capacity
With connection accessories for G 1
7172848 – Vitocell 300: 300 to 500 l capacity
With connection accessories for G 1¼
4
VIESMANN
31