Positioning Table (T33904) - Grizzly T33903 Owner's Manual

Positioning Table
(T33904)
The Model T33904 table moves vertically, rotates
360° around the column, and tilts 45° left or right.
Remove any loose objects from the table surface
before adjusting the table position.
Raising/Lowering Table
Loosen table height lock handle (see Figure
1.
39).
2. Raise or lower table by rotating table height
crank (see Figure 39), then tighten table
height lock handle to secure.
Table
Height
Crank
Figure 39. Table height controls.
Tilting Table
Tool Needed
Wrench or Socket 30mm ................................... 1
To tilt table:
Loosen hex bolt shown in Figure 40.
1.
Figure 40. Location of hex bolt.
-32-
Table Height
Lock Handle
Qty
Tilt table until pointer aligns with desired
2.
angle on scale (see Figure 41).
Tilt Angle
Scale
Pointer
Figure 41. Location of table tilt scale and pointer.
Tighten hex bolt from Step 1 to secure table
3.
angle.
Rotating Table Around Column
Loosen table height lock handle (see Figure
1.
42).
2. Rotate table to desired location on column,
making sure to guide column rack with table
(see Figure 42), then tighten table height
lock handle to secure.
Column
Rack
Figure 42. Location of table height lock handle
and column rack.
Model T33903/T33904 (Mfd. Since 07/23)
Table Height
Lock Handle