Install The Account Management Tool (Amt) And Freeflow Accxes Client Tools (Act) - Xerox 6050 Customer Training Manual

Install the Account Management Tool (AMT) and FreeFlow Accxes
Client Tools (ACT)
16
FreeFlow Accxes Print Server loaded with
FreeFlow Accxes Firmware 11.0
The IP Address of at least one printer.
The ACT and the AMT softwares can both be
installed during the same installation. A password
is required for the AMT installation because it
should be loaded on only one computer and used
by only one person per company. No password is
required for installing ACT.
After you have installed the Account Management
Tool, you will be using several of the help files to
complete this part of the training.
Do the following to install both the AMT and
ACT softwares.
Insert the Client Install CD into a CD-
ROM.
If you downloaded the software from the
Internet:
Open the downloaded zip file.
-
- Extract the files.
- Select the install.exe file to start the
install software.
On the first install screen, choose the
language.
On the "Enter Password" screen, if you are
loading both AMT and ACT, put in the
password. Ask your system administrator
for the password. If you are installing just
the ACT, press the Next button.
Follow the directions on the screens.
On the "Choose Shortcut Location" screen,
choose where you want the shortcut to
show, such as "On the Desktop".
On the "Choose Install Set", choose the
FreeFlow Accxes Client Tools button to
install only the ACT software. To install
both ACT and AMT, select FreeFlow
Accxes Account Management & Client
Tools to install both ACT and AMT. You will
FreeFlow Accxes Software Tools Training Guide