Driver And Client Software Installation; Drivers; Installation; Client Tools - Xerox 6030 Setup Manual

Driver and Client Software Installation

Drivers

HP-GL/2, AutoCAD and PostScript Drivers are supported by the FreeFlow Accxes firmware.

Installation

For installation instructions, see the Drivers & Client Software Installation Guide.

Client Tools

Overview

The FreeFlow Accxes Client Tools (ACT) application runs on a PC or Solaris workstation. The
tools enable a user to send print jobs, to retrieve scanned files over the network, and to save
images. Selections made in the Client Tools will temporarily override the default settings of the
FreeFlow Accxes supported printer and scanner.
Installation
For installation instructions, see the Drivers & Client Software Installation Guide. The ACT and
AMT software can be installed during the same install.

Account Management Tool

Overview
The FreeFlow Accxes Account Management Tool (AMT) application is used to retrieve job
accounting data from multiple printers that use FreeFlow Accxes firmware, version 7.0, or greater.
This application replaces the Accounting Tab functionality of the FreeFlow Accxes Client Tools.
It is recommended that the AMT software be loaded on only one workstation that is
password protected. The AMT install password is
Installation
For installation instructions, see the Drivers & Client Software Installation Guide. The ACT and
AMT software can be installed during the same install.
FreeFlow Accxes Printer System and Web Print Management Tool Setup Guide
14
.
AMTPASSWORD