Intended Use - Panasonic EYFLF1XA Operating Instructions Manual

14) Hold power tool by insulated gripping
surfaces, when performing an opera-
tion where the fastener may contact
hidden wiring.
Fasteners contacting a "live" wire
may make exposed metal parts of the
power tool "live" and could give the
operator an electric shock.
WARNING
• Do not use other than the Panasonic bat-
tery packs that are designed for use with
this rechargeable tool.
• Panasonic is not responsible for any dam-
age or accident caused by the use of
recycled or counterfeit battery pack.
• Do not dispose of the battery pack in a
fire, or expose it to excessive heat.
• Do not allow metal objects to touch the
battery pack terminals.
• Do not carry or store the battery pack
in the same container as nails or similar
metal objects.
• Do not charge the battery pack in a
high-temperature location, such as next to
a fire or in direct sunlight. Otherwise, the
battery may overheat, catch fire, or explode.
• After removing the battery pack from the
tool or the charger, always reattach the
pack cover. Otherwise, the battery contacts
could be shorted, leading to a risk of fire.
• When the Battery Pack Has Deteriorated,
Replace It with a New One. Continued use
of a damaged battery pack may result in
heat generation, ignition or battery rupture.
• To prevent leakage, overheating, smoke
generation, fire, and rupturing from occur-
ring, follow these instructions when han-
dling our rechargeable power tools (tool
main body/battery pack/charger).
- Do not allow material cuttings or dust to
fall onto the battery pack.
- When storing, remove any material cut-
tings and dust from the battery pack,
and place the battery pack separately
from metal objects (screws, nails, etc.)
when storing in the tool case.
• Do not handle the rechargeable power
tools in the following way.
(There is a hazard of smoke generation,
fire, and rupturing)
- Use or leave in places exposed to rain
or moisture
- Use submerging in water
Symbol
V
n
0
... min
-1
Ah

1.2.3 INTENDED USE

This tool is a Cordless Impact Driver / Wrench
can be used to tighten bolts, nuts, and screws.
Additionally, it provides a torque control func-
tion that automatically stops tool operation
when a preset load is reached to deliver con-
sistent tightening torque.
Additionally, a separately available Assembly
Qualifier can provide wireless monitoring to
determine whether tightening has been com-
pleted properly.
IMPROPER USE
The use of the tool other than INTENDED
USE is dangerous and must be avoided.
The tool must not be used for the purposes
such as the following;
• to mix paint or building materials,
• polishing, grinding, sharpening, engraving.
RESIDUAL RISK
Some residual risks remains even with proper
use of the tool such as the following;
• contact with the rotating bit
• contact with the sharp edges of material or
something.
‒ 59 ‒
Meaning
Volts
Direct current
No load speed
Revolutions or reciprocations
per minutes
Electrical capacity of battery
pack
To reduce the risk of injury,
user must read and under-
stand instruction manual.
Do not incinerate or heat
battery pack. Do not charge or
use under conditions of high
temperature. Do not expose to
high temperatures.
Do not disassemble or modify.
Do not expose to rain or water.
EN