Xerox DocuColor 242 Release Note page 40

Mac OS related
Constrained Mac printer driver
At install, you may select either Fast (to use the Unconstrained Mac printer driver) or
Comprehensive (to use Constrained Mac printer driver). The Unconstrained driver functions
more quickly by not checking for constraints between conflicting print options and print
settings. The Constrained driver takes extra time to check for print option constraints. When
in conflict, mutually exclusive print settings will be grayed-out (unselectable) in printer driver.
When working with the Constrained Mac driver, the following additional steps are required:
• Media size needs to be selected from your application's Page Size option (for example,
Letter SEF).
N : For Acrobat files, however, you should set the Page size in the Fiery printer driver.
OTE
• Each time you set or change print options, you must reselect the Summary pane for the
changes to take effect. Depending on number of feature sets, you may need to switch to
the Summary pane several times when preparing a single print job.
• When printing Z-Fold print jobs, Offset Mode (Finishing 2) must be set to Off.
There are no Constraint messages (a k a "Conflict panes") for the Mac printer drivers.
N :
OTE
When working with the Mac drivers, you need to be familiar with print settings and
document workflow.
Preview on Mac OS X
If you print a PDF document using Preview on Mac OS X v10.4, the job name might be
different from the name of the PDF file. If you print the same document using Preview on
Mac OS X v10.3 or Acrobat Reader, the job name is the same as the file name.
Resolving print option conflicts in the Mac OS X v10.4 printer driver
When you change print options in the Mac OS X v10.4 printer driver, specifically in the
Printer Features pane, the print option conflicts are not resolved automatically.
For example, if you select a setting for the Booklet Maker print option, the Duplex print
option must be set to On before the Booklet Maker print options can be selected. The
Booklet Maker print options are dependent on the Duplex print option.
In previous Mac OS versions, the print option conflicts were automatically resolved.
For Mac OS X, to resolve the print option conflicts in the Printer Features pane, use the
following procedure:
Page 40