Table of Contents
Advertisement
Reinsert the cleaned pre-filter into the
cleaned dust container as far as it will
go.
Close the dust container flap, making
sure it clicks into place.
Cleaning the fine dust filter
Clean the fine dust filter thoroughly at
least once every 3 months outside the
PowerUnit.
Turn the screw cap 10 times by 180°.
When turning the cap, you will hear a
noise, which is a normal part of how the
ComfortClean self-cleaning function
works.
Press both release buttons at the side
of the fine dust filter lid and remove
the fine dust filter by pulling it up-
wards.
Risk of damage caused by incor-
rect cleaning.
The fine dust filter can become dam-
aged and be less effective as a res-
ult.
Do not clean the fine dust filter with
water and avoid cleaning the inside.
Do not use pointed or sharp-edged
objects to clean the filter. Do not
brush the fine dust filter (not even
with the cleaning tool supplied).
Hold the fine dust filter over a bin.
Empty the fine dust filter by carefully
tapping the lower edge.
Turn the fine dust filter slightly while
you do this to free the dirt from all of
the crevices.
Refit the cleaned fine dust filter into
the PowerUnit, making sure it clicks
into position.
27
Advertisement
Table of Contents
