Press the release button on the bot-
tom of the dust container.
The flap will open and the dust will fall
out.
If dust balls, hair or coarse debris do
not fall out, remove the pre-filter by
pulling it downwards (see the following
section: "Cleaning the dust container
and pre-filter").
Close the dust container flap, making
sure it clicks into place.
Cleaning the dust container and pre-
filter
Clean the dust container and pre-filter
as required.
Empty the dust container over a bin.
26
Remove the pre-filter by pulling it
downwards.
Risk of damage caused by incor-
rect cleaning.
The pre-filter can become damaged
and be less effective as a result.
Do not clean the pre-filter with water.
Do not use pointed or sharp-edged
objects to clean the filter.
Clean the dust container and pre-filter
with a dry cloth or with a cleaning
tool which is located on the side of
the PowerUnit.