Omron Avail Instruction Manual page 7

Important Safety Information
• DO NOT put any metal object, such as coin, clip or other metal on the charger.
• DO NOT put the pad on your body where it cannot be reached by your own hand.
• While using this device, make sure that no mobile device or any other electrical
devices that emit electromagnetic fields is within 30 cm. This may result in poor
performance of the device.
• Ensure that this device has acclimated to room temperature before using. Using
this device after an extreme temperature change could lead to an improper
operation. OMRON recommends waiting for approximately 2 hours for the
device to warm up or cool down when the device is used in an environment
within the temperature specified as operating conditions after it is stored either
at the maximum or at the minimum storage temperature. For operating, storage
and transport conditions, refer to "Specifications" on page EN31.
Data Transmission/Remote Control
• DO NOT place integrated circuit cards, magnets, metal objects, or other devices
that emit electromagnetic fields near this device while the device is controlled
remotely. This may result in the incorrect operation of your device and
smart device.
EN6
Adverse Reactions
• You may experience skin irritation and burns beneath the stimulation electrodes
applied to your skin.
• You may experience headache and other painful sensations during or following
the application of electrical stimulation near your eyes and to your head and face.
• You should stop using the device and should consult with your physician if you
experience adverse reactions from the device.