Omron Avail Instruction Manual page 15

Preparing for Use
Step 3 – Pairing the Device to Your Smart Device
1. Turn on the device, following the app instructions.
2. Confirm the device is paired successfully.
When the device is successfully paired to the smart device, there will be a
steady green indicator light on the device.
Which One Is Device A?
The device that is connected first will be referred to as device "A" on the app.
The second device that is connected will be referred to as device "B".
EN14
Step 4 – Attaching the Device onto the Pad
For first time use, remove the pad from the sealed plastic bag and attach the
device. Do not remove the plastic film at this time.
1. Attach the connector to the connection hole and
push the device until it clicks into place.
Connection holes
Connector