Table of Contents
Advertisement
2.
Select the desired waypoint and
press the GOTO soft key to start
navigating to your destination.
NOTE: Navigation cannot begin without the GPS location information. You
can operate the radio during navigation, but you cannot edit or change
location information (destination or route) during navigation.
3.
As you navigate, the screen
displays your position information.
4.
When you arrive at the destination,
an arrival message displays and
the arrival alert sounds. You can
select whether to continue or to end
navigation by pressing either the
END or CLEAR soft keys.
If you select CLEAR, navigation
continues; once you go out of range
and return to the range, the arrival
message displays and the arrival
alert sounds again
NOTE: You can stop navigating anytime
by pressing the CLEAR key.
E-58
MHS338BT Radio Owner's Manual
Advertisement
Table of Contents
