Table of Contents
Advertisement
2.
Use the ▲ and ▼ keys to select
ROUTING METHOD and press
SELECT. AUTO and MANUAL
display.
x If AUTO selected, the screen
automatically changes to the
next destination.
x If MANUAL is selected,
navigation will not start until
you press NEXT.
3.
Select ROUTE DIRECTORY from
the WAYPOINT SETUP screen
and press SELECT. The ROUTE
DIRECTORY screen displays a list
of available routes.
NOTE: These settings cannot be set or changed during navigation. To make any
changes, first exit Navigation mode.
Use the ▲ and ▼ keys to select a route and press EDIT. The EDIT screen
4.
displays again.
5.
Use the ▲ and ▼ keys to select NAME and press SELECT. The SET NAME
popup keyboard displays.
6.
Enter a name for the Waypoint.
When complete, press SAVE. The
EDIT screen displays again.
E-56
MHS338BT Radio Owner's Manual
Advertisement
Table of Contents
