Shure Microflex MXN5-C Manual page 7

Step 1A: Install A-MXN5-TB for Tile Ceilings
1. Use the loudspeaker packaging or the tile bridge to mark a cutout in the tile.
2. Cut a 10.5 in. (266 mm) hole in the tile with the cutting tool.
3. Reinstall the ceiling tile with the tile bridge on top of the tile.
4. Follow the steps to connect the loudspeaker.
Step 1B: Install A-MXN5-NCB for Unfinished Ceilings
1. In an unfinished ceiling, nail or screw the new construction bracket to the ceiling joists. Install the Cat5e cable above
the ceiling joists. Complete any finish work required on the ceiling.
The new construction bracket helps distribute the weight of the loudspeaker in the ceiling.
2. Use the loudspeaker packaging to mark a cutout in the ceiling material.
3. Cut a 10.5 in. (266 mm) hole in the ceiling material.
4. Follow the steps to connect the loudspeaker.
Step 2: Connect the Loudspeaker
1. Attach the Cat5e cable to the loudspeaker. If conduit is required, run the Cat5e cable through conduit and attach to the
loudspeaker.
Shure Incorporated
7/25