X10 VK34A Owner's Manual page 6

C
ONNECTING
H C
OOKING UP THE AMERA TO THE
Referring to the diagram on the next page:
1. Plug the video plug on the adapter cable into the yellow Video-In
jack on the Video Sender (transmitter).
2. Plug the Camera's plug into the video adapter.
3. Plug the audio jack into either audio socket (red or white) on the
Video Sender (transmitter).
4. Plug the adapter cable's power plug into the power jack on the
Video Sender.
5. Plug the Video Sender's power supply jack into the adapter
cable's power socket. Use the smaller of the two power supplies.
6. Plug the power supply into any 120V AC outlet.
7. Turn Video Sender's power switch (on side of unit) on.
8. Attach the camera to a wall in the location you want to monitor
using the mounting bracket (supplied). Mount it with the cable
coming out of the bottom.
9. Adjust the antenna on the Video Sender if necessary to aim it in
the direction of the receiver you have connected to your TV or
monitor.
10
U
P
V S
IDEO ENDER
VT30A
Video
Sender.
Plug video
adapter in here.
Audio.
Plug camera in here.
SC15A
Important:
always unplug
the power
supply before
Plug into
unplugging the
any AC
power jacks.
outlet.
11
Adjust antenna.
Turn power
switch on.
Plug power
jack in here.
Adapter Cable.
Plug power
supply in here.