NTRODUCTION The VR30A Video Receiver works with X10's Wireless Video Sender kit (VK30A) for situations where you want to install an additional receiver on another TV, for example. The VK30A's Sender base unit connects to your DBS™ receiver, VCR, Cable Box, etc., and the Receiver unit connects to a TV in another room.
Page 3
4. Set the channel switch to the same letter as you set on the Video Sender, A, B, C, or D. 5. Position the Audio/Video Receiver in a convenient location such as on top of the TV and orient the antenna so that the flat side points in the direction where you set up the Video Sender.
If you are experiencing interference between the Video Sender and some other equipment that uses 2.4 GHz, check the other device's owner's manual for the frequencies of each channel that it uses. X10 Video Senders use the following frequencies: Channel A: 2.411 GHz, Chan B: 2.434 GHz, Chan C: 2.453 GHz, Chan D: 2.473 GHz.
ONTH IMITED ARRANTY X10.COM A DIV. OF X10 WIRELESS TECHNOLOGY , INC. (X10) WARRANTS ITS PRODUCTS TO BE FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR FROM THE ORIGINAL DATE OF PURCHASE AT RETAIL. X10 AGREES TO REPAIR OR REPLACE, AT ITS SOLE DISCRETION, A DEFECTIVE X10 PRODUCT IF RETURNED TO X10 WITHIN THE WARRANTY PERIOD AND WITH PROOF OF PURCHASE.