Sony SLV-772HF Operating Instructions Manual page 89

Hide thumbs Also See for SLV-772HF:
Table of Contents

Advertisement

300-ohm twin
lead cable
Attaching the external
antenna connector
When using a 300-ohm twin lead cable
for VHE/UHF antenna, use the EAC-32
antenna connector (not supplied) to
connect the antenna to the VCR.
EAC-32 Antenna
connector (not
supplied)
1
Loosen the screws on the antenna connector.
2.
Wind the twin leads around the screws on the antenna connector.
3
Retighten the screws.
When using both 75-ohm coaxial cable
75-ohm coaxial a
cable
Loosen the screws on the mixer.
Wind the twin leads around the screws on the mixer.
Retighten the screws.
AaWN
=
Connect the 75-ohm coaxial cable to the mixer.
Additional
Information
89

Advertisement

Table of Contents
loading

This manual is also suitable for:

Slv-779hf

Table of Contents