Sony SLV-772HF Operating Instructions Manual page 6

a a a a ae a a rr are
Step 2: Setting up the remote commander (continued)
Notes
* With normal use, the batteries should last about three to six months.
¢ If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
* Do not use a new battery with an old one.
* Do not use different types of batteries.
Controlling other TVs with the remote commander
The remote commander is preprogrammed to control non-Sony TVs. If your
TV is listed in the table below, set the appropriate manufacturer's code
number.
1° Set [TV]/[VIDEO] at the top of the remote commander to [TV].
2 Hold down I/0, and enter your TV's code number(s) using the number
buttons. Then release 1/().
Now you can use the I/ (, VOL +/-, CH +/-, and TV/VIDEO buttons to
control your TV. You can also use the buttons marked with a dot (¢) to
control a Sony TV. To control the VCR, reset [TV]/[ VIDEO] to [VIDEO].
6 Getting Started