Sony SLV-772HF Operating Instructions Manual page 37

Press #/¥ to highlight AUTO, then press
OK.
TIME ZONE
DAYLIGHT SAVING
RETURN
SELECT :
SET Hl
Qquirs:
Press #/¥ to highlight FULL AUTO, then
press OK.
TIME ZONE
DAYLIGHT SAVING
RETURN
SELECT :
SET :
QuiT :
7)
oO
ot
a.
s
ice}
w
pas
pe)
+
ms
5)
a.
Press #/4 to highlight YES, then press OK.
Press MENU to exit the menu.
To activate the Auto Clock Set function, turn off the VCR.
The VCR automatically sets the clock by searching for a channel that
carries a time signal and sets your time zone and Daylight Saving
Time (if applicable).
If your clock is set to the wrong time zone or Daylight Saving Time,
you can adjust these settings without turning off the Auto Clock Set
feature (page 38).
Tip
* If you want to return to the previous menu, highlight RETURN and press OK.
Notes
¢ The clock cannot be set automatically if you don't receive a channel that carries a
time signal in your area. If so, set the clock manually.
e If there are only a few channels in your area that carry time signals, setting the clock
automatically may take up to about 30 minutes. If nothing happens even after you
wait about 30 minutes, set the clock manually.
* If you use Hookup 1, make sure you leave the cable box on.
continued
Getting Started 37