Sony SLV-772HF Operating Instructions Manual page 100

To play a tape
1 Set the TV to channel 3 or
4 (or to video input, if you
made A/V connections.)
2 Insert a tape and press
(> PLAY.
To record a program
1 Turn on the cable box.
2 Press VCR Plus+ on the
remote commander.
3 Enter the PlusCode
number.
4 Select ONCE, DAILY, or
WEEKLY, then press
ENTER.
5 Insert a tape.
6 Press I/() to tum off the
VCR.
7 Leave the cable box on.
To watch TV
1 Turn off your VCR, or
press the VCR's TV/
VIDEO button until the
VIDEO indicator in the
display window goes off.
2 Turn on your cable box.
3 Set the TV to the cable box
output channel (usually 2,
3, or 4).
4 Set the cable box to the
channel you want to
watch.
To play a tape
1 If you made A/V
connections, set the TV to
video input.
If you didn't use A/V
hookup:
¢ Turn on the cable box.
¢ Set the cable box to
channel 3 or 4.
* Set the TV to the output
channel of the cable box
(usually 2, 3, or 4).
2 Insert a tape and press
[> PLAY.
To record a program
1 Press VCR Plus+ on the
remote commander.
2 Enter the PlusCode
number.
3 Select ONCE, DAILY, or
WEEKLY, then press
ENTER.
4 Insert a tape.
5 Press 1/() to turn off the
VCR.
To watch TV
1 Turn off your VCR, or
press the VCR's TV/
VIDEO button until the
VIDEO indicator in the
display window goes off.
2 Select the channel with
your cable box (if you have
one) or with your TV.
To play a tape
1 Set the TV to channel 3 or
4 (or to video input, if you
made A/V connections.)
2 Insert a tape and press
[> PLAY. If there's no
picture on your TV, press
the VCR's TV/ VIDEO
button until the VIDEO
indicator comes on in the
display window.
To record a program
1 Press VCR Plus+ on the
remote commander.
2 Enter the PlusCode
number.
3 Select ONCE, DAILY, or
WEEKLY, then press
ENTER.
4 Insert a tape.
5 Press 1/(© to turn off the
uick reference to using the VCR
To watch TV
1 Turn off the VCR, or press
the VCR's TV/ VIDEO
button until the VIDEO
indicator in the display
window goes off.
2 Set the TV to the channel
you want to watch.
To play a tape
1 Set the TV to channel 3 or
4 (or to video input, if you
made A/V connections.)
2 Insert a tape and press
[> PLAY.
To record a program
1 Turn on the cable box.
2 Set the cable box to the
channel you want to
record.
3 Press VCR Plus+ on the
remote commander.
4 Enter the PlusCode
number.
5 Select ONCE, DAILY, or
WEEKLY, then press
ENTER.
6 Insert a tape.
7 Press 1/@) to turn off the
VCR.
8 Leave the cable box on.
To watch TV
1 Turn off your VCR, or
press the VCR's TV/
VIDEO button until the
VIDEO indicator in the
display window goes off.
2 Turn on your cable box.
3 Set the TV to the cable box
output channel (usually 2,
3, or 4).
4 Set the cable box to the
channel you want to
watch.
VCR.
Sony@Piine
http://www.world.sony.com/
If you have any questions about this product, you may call: Sony Customer Information Center
1-800-222-SONY (7669) or write to: Sony Customer Information Center Sony Drive, Mail Drop
#T1-11, Park Ridge, NJ 07656
Sony Corporation Printed in Malaysia