Removing The Stand And Mounting The Display - ViewSonic VS19736 User Manual

Removing the Stand and Mounting the Display

Refer to the table below for the standard dimensions for mounting kits.
NOTE: For use only with a UL certified mounting kit/bracket. To obtain a wall
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum Hole pattern
Loading (W x H)
14 kg 100 x 100 mm
NOTE: Mounting kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Press and hold the quick release tab and carefully lift the stand.
4. Pull down slightly to disengage the hooks and remove the stand.
Interface Pad
(W x H x D)
115 x 115 x 2.6 mm
1
2
2
14
Screw
Pad Hole
Specification
Ø 5 mm M4 x 10 mm
1
3
3
Screw
Quantity
4 pieces