Table of Contents
Advertisement
STEPS
TIPS
1. Select the
• See Cycle Selection and Cycle Settings for
appropriate
cycle and
• See Cycle Setting Charts to determine which
settings for
each load.
• To provide the best care, not every setting or
• Adjustments made to most cycle settings will be
2. Close the
• To start the drying cycle, close the door and press
dryer door
and start the
• To add an item to the dryer drum, press start/
drying cycle.
• To change settings or options after the cycle has
• To change the cycle once the cycle has begun,
• To cancel a cycle, press cancel.
3. Remove
• A signal will sound at the end of the cycle if the
items when
done.
• Immediately remove items when the cycle is
4. Clean the lint
• See Care and Cleaning section of this instruction.
filter.
• CLEAN LINT will be displayed at the end of the
OPERATING INSTRUCTIONS
detailed descriptions of cycle controls.
settings are available for each cycle.
option is available with every cycle. If a setting
or option is not available for the cycle selected,
the indicator will not light. See Setting Chart for
information of available options for each cycle
by model.
remembered each time the cycle is selected in the
future. When the dryer is powered on, the default
cycle will be the normal cycle. Select your desired
cycle and previous settings will remain. To return to
factory settings, press the dryness button and the
options button at the same time and hold until the
signal sounds.
To return to factory settings,
press the dry level/dryness and
options buttons at the same time
the start/pause button.
and hold until the signal sounds.
pause. Add the item, close the door and press
start/pause to resume the cycle.
begun, press start/pause, change the settings, and
then press start/pause. If the cycle is not paused
first, the unit will emit several beeps when the
buttons are pressed but no changes to the cycle
will be applied.
press cancel to cancel the cycle, select the
new cycle, and press start/pause to begin the
new cycle. Changing a cycle selection without
cancelling the current WILL NOT change the cycle.
chime option is not set to mute.
completed and hang or fold.
cycle as a reminder to remove lint from filter.
39
IMPORTANT
Over-drying can
cause wrinkles,
shrinkage, lint,
harshness, and a
build up of static
electricity.
To prevent
unintentional
and accidental
exposure of
delicate material
to excess heat
or unexpected
steam, the sanitize
temperature
setting and the
perfect steam™
option will not be
remembered and
must be reselected
each time.
The dryer will not
operate with the
door open.
When drying a
single large or
bulky item, such
as a comforter,
pause the cycle
part way through
to turn the item
"inside out" and
maximize drying
effectiveness.
See product
manufacturer's
instructions.
ALWAYS REMOVE
LINT at the end
of the cycle
(see warning on
previous page).
Advertisement
Table of Contents
